Ancon HRT4 Housing Wall Tie
The Ancon Staifix HRT4 is suitable for cavities from 50mm to 150mm and can be used in the construction of domestic houses up to 10 metres in height. Altitude and wind speed restrictions may apply.
Independent tests have proven the HRT4 has a measured dynamic stiffness of <4.8MN/m3 when installed at a standard 2.5 ties/m2 spacing and is therefore suitable for internal separating (party) walls of new-build attached dwellings with cavities from 50mm to 150mm.
The HRT4 is CE Marked and can be used in line with NHBC standards.
The HRT4 can be used with all approved robust details for cavity masonry separating walls, whether traditional or thin-joint blockwork. Use of these details eliminates the need for pre-completion sound testing.
Conforms to PD 6697 as a type 4 tie – Suitable for party walls at 50-150mm cavities – Designed to replace the Butterfly Tie – Can be used in line with NHBC standards
| HRT4 – conforms to EN 845-1 and BS 5628-1 as a Type 4 Tie | ||
| 200mm | up to 75mm cavity | Box 250 |
| 225mm | up to 100mm cavity | Box 250 |
| 250mm | up to 125mm cavity | Box 250 |
| 275mm | up to 150mm cavity | Box 250 |
| Suitable for party walls | ||
