Timloc Everdry Stepped Cavity Trays

The Timloc leaded Everdry cavity tray range is a series of products for use at the abutment of a pitched roof with a cavity wall. They differ from standard cavity trays in that they are supplied with factory fitted lead flashings. This means that the bricklayer automatically installs both the cavity tray and the lead flashing in a single operation. All the products in this cavity tray range are designed so as to comply fully with the Building Regulations, British Standards and the NHBC.

The leaded Everdry range also has full BBA certification. Key points to note are the high back upstand and the integral stopends. Both these are standard requirements with the NHBC.

The leaded Everdry range includes a large number of components which can cope with almost any wall construction. Products are available to suit brick, stone or block coursing and cavity widths of between 50mm and 150mm. The stone and block coursing trays can also be supplied to suit thicker external walls, with bed widths of up to 150mm.

Each set of leaded Everdry cavity trays include a range of standard components that work together to form a complete cavity tray system. These include stopend starter trays, corner starter trays, intermediate trays and ridge trays. Code 4 lead is supplied as standard, heavier grades are available to special order.

Description Length Handing Product codes

(cavity widths of 50 – 150mm)

Intermediate tray RH 225mm RH 20001
Intermediate tray LH 225mm LH 20002
Intermediate tray RH 420mm RH 20011
Intermediate tray LH 420mm LH 20012
Stopend starter tray 225mm RH/LH 20031/32
Corner starter tray 225mm RH/LH 20041/42
Ridge tray 225mm N/A 20061


Product Categories